Fujitsu SPARC Enterprise M4000 Reference Manual page 171

When the OpenBoot PROM environmental variable 'auto-boot?' has been set
■
to false, the auto boot function is disabled.
value specified with '-m diag' is applied to the diag level of the addboard(8)
■
command and moveboard(8) command.
The settings of the current domain mode can be checked by using the
■
showdomainmode(8) command.
EXAMPLES
EXAMPLE 1
XSCF>
Diagnostic Level
Secure Mode
Autoboot
The specified modes will be changed.
Continue? [y|n]:
configured.
Diagnostic Level
Secure Mode
receive)
Autoboot
EXAMPLE 2
XSCF>
Diagnostic Level
Secure Mode
Autoboot
The specified modes will be changed.
Continue? [y|n]:
configured.
Diagnostic Level
Secure Mode
receive)
Autoboot
EXAMPLE 3
XSCF>
Diagnostic Level
Secure Mode
Autoboot
The specified modes will be changed.
Continue? [y|n]:
EXAMPLE 4
XSCF>
The setting of the diagnostic level for domain ID 0 is none.
setdomainmode -d 0 -m diag=none
:min
:on
:on
y
:none
:on (host watchdog: available
:on (autoboot:on)
The Auto boot function is enabled for domain ID 0. Automatically answers 'y'
to all prompts.
setdomainmode -y -d 0 -m autoboot=on
:none
:on
:off
y
:none
:on (host watchdog: available
:on (autoboot:on)
Cancels the setdomainmode(8) command execution that is in progress.
setdomainmode -d 0 -m diag=none
:min
:on
:on
n
The Auto boot function is enabled for domain ID 0. Suppresses prompts, and
automatically answers 'y' to all prompts
setdomainmode -q -y -d 0 -m autoboot=on
System Administration
-> none
-> -
-> -
-> -
-> -
-> on
-> none
-> -
-> -
setdomainmode(8)
Break-signal:non-
Break-signal:non-
175