Programming Memory/Bank/Scan Name - Icom ID-E880 Instruction Manual

Vhf/uhf digital transceiver
Hide thumbs Also See for ID-E880:
Table of Contents

Advertisement

7
MEMORY/CALL CHANNELS

Programming memory/bank/scan name

Each memory channel can be programmed with an alpha-
numeric channel name for easy recognition and can be in-
dicated independently by channel. Memory and scan names
can be a maximum of 8 characters, and bank name can be a
maximum of 6 characters.
NOTE: Scan name indication can be turned ON or OFF in
DISP set mode (SET). (p. 131)
q Push [M/CALL] to select the memory mode.
• To program a call channel name, push [M/CALL] to select the
call channel mode.
w Rotate [DIAL] to select the desired memory channel.
• Select scan edge channels (0A/0B to 24A/24B) to program a scan
name.
e Push [S.MW] to enter the select memory write mode.
• "X" indicator and the memory channel number blink.
r Push [
](MONI) .
t Rotate [DIAL] to select "B NAME," "M NAME" or "S NAME"
when programming the bank name, the memory name or
the scan name, respectively.
y Push [
](MONI).
• A cursor blinks for the first character.
u Rotate [DIAL] to select the desired character.
• The selected character blinks.
• Push [ ](LOW) to move the cursor right; push [ ](CS) to move
the cursor left.
• Push [CLR](DR) to erase the selected character, or push and hold
[CLR](DR) for 1 sec. to erase all characters following the cursor.
94
i Repeat step u until the desired channel name is pro-
grammed.
o Push [
](MONI).
!0 Push and hold [MW](S.MW) for 1 sec. to set the name and
exit channel name programming state.
• 3 beeps sound.
NOTE: Only one bank name can be programmed into
each bank. Therefore, the previously programmed bank
name will be displayed when bank name indication is se-
lected. Also, the programmed bank name is assigned for
the other bank channels automatically.
D Available characters
(A) (B) (C) (D) (E)
(F) (G) (H)
(N) (O) (P) (Q) (R) (S)
(T) (U) (V) (W)
(0)
(1)
(2)
(3)
(4)
(5)
(6)
'
($) (%) (&)
(
)
( ( )
( ) ) ( )
;
(
) ( < ) ( = ) (>)
(?)
( @ ) ( )
( I )
(J)
(K)
(L) (M)
(X) (Y)
(Z)
(7)
(8)
(9)
(!)
(")
(#)
/
( + )
( , )
( - )
( . )
(
)
(:)
( \ )
( ] )
( ^ ) ( Space )

Advertisement

Table of Contents
loading

This manual is also suitable for:

Id-880h

Table of Contents