Removing An Expansion Card - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Concluding steps
▶ If applicable, install the SAS expander board holder, see
expander board holder " on page
▶ If applicable, remove break-outs from the system fan module (see
Figure 170 or Figure
▶ Install the system fan module, see
page 85.
▶
"Reassembling" on page 66
▶ Connect all external cables.
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶
"Updating expansion card firmware" on page
▶
"Enabling Option ROM scan" on page
▶
"Resuming BitLocker functionality" on page
▶ If
applicable,"Configuring LAN teaming" on page
9.5.2

Removing an expansion card

Upgrade and Repair Unit
(URU)
Tools: tool-less
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶ Remove all external cables from the expansion card to be removed.
▶
"Getting access to the component" on page
TX1330 M4
271.
171).
"Installing the system fan module" on
79.
81.
107.
47.
Upgrade and Maintenance Manual
Expansion cards and backup units
106.
121.
128.
Hardware: 5 minutes
99.
48.
50.
"Installing the SAS
305