Load A Registered Pattern; Clearing Preset Values - Ricoh DDP 184 User Manual

Load a Registered Pattern

To use a registered pattern perform the following steps:
1. From the OCP make the following selections:
Printer / Paper Source / Paper Pattern / Preset Load / Tray #.
The following screen is displayed.
2. Select the desired Tray #. Use the
enter (

Clearing Preset Values

You can clear the preset values and return them to the default settings individually or
all at once using the following steps.
1. From the OCP select
Printer / Paper Source / Paper Pattern / Preset Clear / Tray #.
The following screen is displayed:
<
).
5 6
/ buttons to select the Pattern #, then press
Paper Handling 3-33