Setting The Paper Size Using The Control Panel - Ricoh Aficio MP W3600 Printer Reference

Setting the Paper Size Using the Control Panel

Follow the procedure below to set the machine using the control panel when
loading standard size paper onto the bypass tray.
Important
❒ The following procedures are not required if you select [Driver / Command] from
[Bypass Tray Setting Priority] in [System] of [Printer Features] (see "Printer Features",
General Settings Guide). In that case, set the paper size using the printer driver.
❒ Under [Printer Features], [System], if you set [Bypass Tray Setting Priority] to [Driv-
er / Command] , paper size settings made on the printer driver must match
those made on the control panel. If they do not match, an error message ap-
pears and printing stops if [Printer Features], [System], [Auto Continue] is not set.
For details about [Printer Features] settings, see General Settings Guide.
A
Press the {User Tools/Counter} key on the control panel.
B
Press [System Settings].
C
Press the [Tray Paper Settings] tab, and then press [Printer Bypass Paper Size].
D
Select the paper size.
E
Press [OK].
F
Press the {User Tools/Counter} key.
The initial screen appears.
Note
❒ When loading translucent paper or film, set paper size and paper type.
❒ For printer driver settings, see the printer driver Help.
ATW022S
15