Replacing The Developer Mix; Exhausting The Developer Mix - Ricoh DDP 184 User Manual

6. Dispose of the full toner bottle properly.
WARNING!
Waste materials should be disposed of or incinerated under conditions
which meet all federal, state and local environmental regulations. Since
regulations may vary from one region to another, check with the agency
that governs waste disposal in your area for proper procedures.

Replacing the Developer Mix

Replacing the developer mix is a two-phase process. First you exhaust the Developer
Mix, and then you supply it.

Exhausting the Developer Mix

1. Take the empty developer bottle out of the box.
2. Open the Front Cover of the printer.
3. Attach the empty developer bottle to the Developer Unit Duct so that the slot of
the bottle fits the projection of the duct.
Projection
Slot
Care and Maintenance 6-7