Inter-Tel Axxess User Manual page 18

5. When the Desktop OAI Connection Settings dialog box appears, select the type
of connection you will be using. Your options are Serial Port (PCDPM) or TCP/
IP Connection. The window will change, depending on your selection, as shown
below.
Serial Port Settings
If you selected Serial Port Connection, complete the following fields:
•
Serial Port: Select the desired port using the available COM ports listed in
the drop-down combo box.
•
Bits Per Second: Select the Bits Per Second from the drop-down combo
box. The maximum is 4800.
NOTE
a COM port and Bits Per Second rate that are appropriate for the DTI Server
computer and the attached PCDPM.
•
Extension and Keyset Password: Enter the extension number and password
for the station you will be using. If you change the Extension or Keyset Pass-
word while an application is currently connected to the telephone system
(using the PCDPM), the DTI Server will display an error message that asks
if you want to change the Desktop OAI connection settings. If you click OK,
the settings take affect immediately. The next application to connect the DTI
Server must use the new Extension and/or Keyset Password.
NOTE
message of an application connecting to the DTI Server. This DOES NOT
guarantee that the Desktop OAI connection from the PCDPM is for the Exten-
sion you have chosen. It is up to the connected application to verify that it is
connected to the Desktop OAI connection of the proper extension.
4
TCP/IP Settings
Because the Serial Port settings are not validated, be sure to select
Extension and Keyset Password are ONLY used to verify the login
Axxess Desktop SoftPhone User Guide