Paging; Making Pages; Enabling Paging - Inter-Tel Axxess User Manual

P
AGING
The Paging feature allows you to make an announcement through phone speakers or
external speakers (if your system is equipped with external paging equipment). To
prevent announcements from transmitting through every phone in the system, this fea-
ture uses Page Zones. Each zone contains a different combination of extensions and
external paging equipment, and is programmed by your System Administrator. Ask
your trainer or System Administrator how the zones are programmed, and list them
here for your convenience:
NOTE:
Using paging on an Desktop SoftPhone consumes as much bandwidth as a
telephone call to the device. If your site has limited bandwidth, limit pages.

Making Pages

To make pages:
1. Press
2. Enter the desired zone number (0-9).
3. After the tone, make your announcement.
4. Click
SPKR

Enabling Paging

You can enable or disable page receiving for your phone by using the Page Remove/
Replace feature code. If your phone is assigned to more than one Page Zone, all zones
are removed or replaced at once (you cannot turn off individual zones).
To turn paging on and off for your phone:
Enter
3 2
Axxess Desktop SoftPhone User Guide
0 _______________________
1 _______________________
2 _______________________
3 _______________________
4 _______________________
.
7
to hang up.
.
5
5 _______________________
6 _______________________
7 _______________________
8 _______________________
9 _______________________
71