Configuring Voip Parameters - AudioCodes MP-20 Series User Manual

User's Manual
9

Configuring VoIP Parameters

The VoIP parameters are mainly configured in the 'Voice over IP' screen. This screen is
accessed by clicking the Voice over IP menu in the side menu bar. The 'Voice over IP'
screen provides tabs for configuring the following:

Signaling protocol (i.e., Session Initiation Protocol / SIP) – see Section

Dialing – see Section

Media streaming – see Section

Voice and fax – see Section

Supplementary services – see Section

Line settings – see Section

Line extensions – see Section

Speed dials – see Section

Telephone interfaces – see Section
Notes:
•
By default, the 'Voice over IP' screens initially display only basic parameters. To view
all the parameters, click the Advanced button in the required screen.
•
Once you have configured the VoIP parameters, you can start using your analog
telephones, as described in Chapter
Version 4.4.3
9.2 on page 80
9.3 on page 88
9.4 on page 91
9.5 on page
9.6 on page 99
9.8 on page 105
9.9 on page 107
9.10 on page
10 on page 111.
73
9. Configuring VoIP Parameters
9.1
96
109
MP-20x Multimedia Home Gateway
on page 73