Figure 20-11: Successful Configuration File Uploading - AudioCodes MP-20 Series User Manual

3. Enter the path of the configuration file or click Browse and navigate to the
configuration file on your PC.
4. Click OK; the file starts loading from the PC to the device. When loading is complete,
the screen 'Successful Configuration File Loading' opens, prompting you to confirm
configuration file load.

Figure 20-11: Successful Configuration File Uploading

5. Click OK to confirm; the upgrade process commences and takes a couple of minutes
to complete. At the conclusion of the file load process, the device automatically
reboots. When the device completes the reboot, the new configuration file is applied
and the 'Login' screen appears, prompting you to login again.
6. Login with your username and password.
Note: During the load process, it is recommended not to power down the device nor stop
the file load process to avoid damage to the main firmware. However, if you do, the device
runs a recovery firmware image (also stored on its flash memory). Except for the analog or
VoIP interfaces, the recovery image supports all interfaces and enables the device to
reconnect to the Internet and then download the primary software.
User's Manual
MP-20x Multimedia Home Gateway
308 Document #: LTRT-50614