Pointing Devices - Toshiba PT831U-102T97 User Manual

Parallel/Printer
This tab lets you set the Printer Port Type. Use the Windows Device
Manager to make settings for the Parallel port.
Parallel Port Mode
The options in this tab are ECP and Standard Bi-directional.
ECP
Standard
Bi-directional

Pointing Devices

Pointing Devices
This tab lets you select Auto-Selected and Simultaneous.
Auto-Selected
Simultaneous
Display
This tab lets you customise your computer's display settings for either the
internal LCD screen or for an external monitor.
Power On Display
Lets you set the display to be used when the computer is booted.
Auto-Selected
Simultaneous
Tecra S1 Series
Sets the port type to Extended Capabilities Port
(ECP). For most printers, the port should be set
to ECP. (Default)
This setting should be used with some other
parallel devices.
If a PS/2 mouse is connected to the computer
when you turn on the power, the PS/2 mouse is
enabled and the AccuPoint is disabled.
Otherwise, the AccuPoint is enabled. (Default)
Enables both the AccuPoint and a PS/2 mouse.
Selects an external monitor if one is connected.
Otherwise, it selects the internal LCD. (Default)
Selects both the internal LCD and external
monitor for simultaneous display.
HW Setup and Passwords
7-5