Camera Panning Function - Panasonic WJ-SX150 Operating Instructions Manual

Camera Panning Function

There are three panning modes available as follows: auto
pan, sort mode and sequence mode. Refer to p. 16
Camera-related Functions for details on each mode.
1. Select the desired monitor and camera. (Refer to p. 74
Monitor Selection and p. 75 Camera Selection.)
2. Press the AUTO PAN button four times while holding
down the SHIFT button.
"PAN" will appear on the LED display of the controller as
shown in the figure.
F1 ACK
CAM SETUP SUSPEND
F2 GROUP SEQ
REW/FF
INDEX
PREV
RECORDER STEP
STOP
STOP PLAY
OSD
SETUP
3. Press the assigned numeric button shown below to acti-
vate the panning function of the selected camera.
The LED display indicates the selected mode as fol-
lows.
1: Activates AUTO PAN "PA PA".
2: Activates SORT PAN "PA SO".
3: Activates SEQUENCE PAN "PA SE".
Note: The AUTO MODE parameter previously set in the
camera's SETUP MENU will be automatically
replaced to the activated function parameter.
80
RESET
ALL RESET
TOUR SEQ PRESET
T&D CAM ID EVENT
PROGRAM
AUX1 OFF AUX1 ON
STILL
NEXT
MON STATUS ALL
AUTO PAN
AUX2 OFF AUX2 ON
EL-ZOOM
PAUSE
ALM H VLD H SYS S
CAM FUNC
DEF OFF DEF ON
PAUSE SEQUENCE
MON (ESC) CAM (SET)
LOG OUT
MON LOCK WIPER
SHIFT MULTI SCREEN SEL
4. To exit from the mode, press the MON (ESC) button,
then press the AUTO PAN button while holding down
the SHIFT button.
CALL
PRESET
CLEAR