Camera Control; Lens Control; Pan/Tilt Control - Panasonic WJ-SX150 Operating Instructions Manual

CAMERA CONTROL

Buttons and control for cameras or camera site accessories
are located on the right side of the front panel of the system
controller.
Included are zoom control, focus control, iris control, preset
and pan/tilt controls.
Normally, combination cameras equipped with the specific
feature or a WV-RC100 or WV-RC150 Receiver are required
to utilize these functions.
Note: Refer to the cameras' operating instructions whether
to confirm that each function is available.

Lens Control

This function is available when specified lens, with motor-
ized zoom/ focus functions, is mounted on the camera, and
the lens selection (DC/VIDEO) on the camera is set to DC.
1. Select the desired monitor and camera. (Refer to p. 74
Monitor Selection and p. 75 Camera Selection.)
2. Press the FOCUS NEAR/FAR buttons while watching
the monitor. The lens focus is adjusted to obtain a
sharply focused image.
To set the lens focus automatically, press these buttons
simultaneously.
NEAR
3. Press the ZOOM WIDE/TELE buttons while watching the
monitor. The lens iris is adjusted to obtain the desired
image.
Press the TELE button to bring an object optically clos-
er. Press the WIDE button to widen the scene optically.
WIDE
4. Press the IRIS CLOSE/OPEN buttons to close/open the
lens iris. The lens iris is adjusted by these buttons to
obtain the proper image exposure.
CLOSE
To reset to the factory default setting, press these but-
tons simultaneously.
76
FOCUS
FAR
AUTO FOCUS
ZOOM
TELE
REC
IRIS
OPEN
AUTO IRIS

Pan/Tilt Control

Manual Operation
1. Select the desired monitor and camera. (Refer to p. 74
Monitor Selection and p. 75 Camera Selection.)
2. Move the joystick to move the pan/tilt head towards the
desired direction.
Eight directions are available: Up/Down/Right/Left/Up-
right/Up-left/Down-right/Down-left.
L
DOWN
Auto Panning
1. Select the desired monitor and camera. (Refer to p. 74
Monitor Selection and p. 75 Camera Selection.)
2. To activate the auto panning function of the selected
camera, press the AUTO PAN button.
AUTO PAN
CAM FUNC
3. To cancel the auto panning function, move the joystick.
UP
R