Monitor Selection And Camera Selection; Monitor Selection; Priority Lock - Panasonic WJ-SX150 Operating Instructions Manual

MONITOR SELECTION AND CAMERA SELECTION

After the log-in procedure, the following operations are
available to control the system.
The operation begins with selecting a monitor, then the
selected camera appears the active monitor.

Monitor Selection

1. To select the desired monitor number (1 to 4), press the
numeric button.
2. Press the MON (ESC) button to execute the selection.
The MONITOR indicator on the controller will light up
and the selected monitor number will appear on the
LED display of the controller.
3. If the selected monitor number is not valid, the PROHIB-
ITED indicator lights up and the number on the LED dis-
play will blink for approximately 3 seconds.
Return to step 1 and select a new monitor number.
Note: The PROHIBITED indicator will blink if an opera-
tor with higher
monitor.Control of the same monitor is denied to an
operator with lower priority.
74
T&D CAM ID EVENT
AUX1 OFF AUX1 ON
STILL
MON STATUS ALL
AUX2 OFF AUX2 ON
EL-ZOOM
ALM H VLD H SYS S
DEF OFF DEF ON
SEQUENCE
MON (ESC) CAM (SET)
MON LOCK WIPER
MULTI SCREEN SEL
priority is controlling

Priority Lock

Applying Priority Lock
1. Select the desired monitor. (Refer to Monitor Selection).
2. Press the MON (ESC) button while holding down the
SHIFT button to toggle the priority lock mode on and off
on the active monitor.
If the priority lock mode is selected, the monitor number
will inversely appear on the active monitor as shown in
the figure.
Note: This function will prevent operators with lower priority
from gaining control of a monitor.
However, higher or equal priority operators may still
gain control of the monitor.
TOUR SEQ
NEXT
PAUSE
PAUSE
SHIFT
Releasing Priority Lock
1. Select the desired monitor. (Refer to Monitor Selection.)
2. Press the MON (ESC) button while holding down the
SHIFT button to release the priority lock mode.
the
The monitor number returns to the normal display on
the active monitor.
T&D CAM ID EVENT
AUX1 OFF AUX1 ON
STILL
MON STATUS ALL
AUX2 OFF AUX2 ON
EL-ZOOM
M04
ALM H VLD H SYS S
DEF OFF DEF ON
SEQUENCE
MON (ESC) CAM (SET)
MON LOCK WIPER
MULTI SCREEN SEL