Tour Sequence; Data Port - Panasonic WJ-SX150 Operating Instructions Manual

(Auto Login/Logout):
Auto Login/Logout window (p. 61)
SYSTEM
(Time & Date):
Time & Date window (p. 62)
(Cable Compensation/VD2/DATA/EXT IN):
Cable Compensation/VD2/DATA/EXT IN window
(p. 63)
(Camera Title):
Camera Title window (p. 63)

(Data Port):

Data Port window (p. 65)
MANAGEMENT
(Put to SX150):
Put to SX150 window (p. 66)
(Get from SX150):
Get from SX150 window (p. 66)
In addition, the main window has fore following buttons.
(File Open):
Select Setup Data File window (p. 67)
(Account Manager):
Account Manager window (p. 67)
(Communication Port):
Communication Port window (p. 68)
(Panasonic):
Opens the version information window of SX150
Admin Console.
close the window.
Note: To reflect each configuration to the system, save the
file by pressing the SAVE button before closing the win-
dow. After that, be sure to put the file from the PC to
the unit.
53
Clicking on "OK" button will

Tour Sequence

This window configures the parameters of tour sequences:
the operating camera, dwell time*, preset position** in each
step.
Each sequence has up to 16 steps, and up to 16
sequences are configurable.
The configuration of a tour sequence can be copied to
another one.
* the display time of a camera image
** the panning/tilting position which has been preset in
advance
Notes:
• Enter the parameters from Step 1 in a sequential order.
If you skip a step, it will result in an error.
• After selecting a camera number, be sure to select the
dwell time, too. If you skip either of them, the message
requesting the parameter entry will appear.
How to Display
To display this window, click on the
button in the main window (p. 52). Or click on the
(Tour Sequence) button in the Group Sequence window.
Parameters
Cam
Selects the operating camera in each step.
The camera is selectable from Camera 1 to 16. After select-
ing Camera 1 to 16 for Cam, select the time for Dwell. To
invalidate a step, select "--" for both of Cam and Dwell.
Preset
Selects the preset position of the operating camera.
The preset position is selectable from Preset 1 to 64.
Note: Refer to p. 77 Program Preset Position for details of
how to program preset positions.
Dwell
Selects the dwell time of the operating camera.
The dwell time is selectable from 1 to 30 seconds (by a
second). Set "--" for Dwell when you have selected "--" for
Cam.
(Tour Sequence)