System Status Table - Panasonic WJ-SX150 Operating Instructions Manual

Moving the Event Display
Move the joystick while holding down the OSD, SHIFT and
3 buttons. (3) will move to the desired direction.
Moving the Monitor Status*
Move the joystick while holding down the OSD, SHIFT and
4 buttons. (4) will move to the desired direction.
* Monitor number, controller number and monitor mode
Moving All the Items
Move the joystick while holding down the OSD, SHIFT and
5 buttons. (1), (2), (3), and (4) will move to the desired
direction.

System Status Table

The table shows the current system status.
1. Select the desired monitor. (Refer to p. 74 Monitor
Selection.)
2. Press the button 9 while holding down the OSD button.
"OSD" will appear on the LED display, and the SYSTEM
STATUS table will appear on the active monitor as
shown in the figure.
MON CAM
1 01
2 02
3 04
4 16
F1 ACK
CAM SETUP SUSPEND
F2 GROUP SEQ
INDEX REW/FF
PREV
RECORDER STEP
STOP
STOP PLAY
OSD
MON CAM
SETUP
1 01
2 02
3 04
The columns in the table indicate the states as shown in the
4 16
figure.
MON:
CAM:
MODE:
84
SYSTEM STATUS
MODE KB OPE PRI
T01 K1 1 30
SPOT K2 2 2
ALARM K4 4 1
CAM PC 30 1
RESET
ALL RESET
TOUR SEQ
T&D CAM ID EVENT
AUX1 OFF AUX1 ON
STILL
NEXT
MON STATUS ALL
AUX2 OFF AUX2 ON
EL-ZOOM
PAUSE
ALM H VLD H SYS S
DEF OFF DEF ON
PAUSE SEQUENCE
MON (ESC) CAM (SET)
SYSTEM STATUS
MODE KB OPE PRI
SHIFT MON LOCK MULTI SCREEN SEL WIPER
T01 K1 1 30
SPOT K2 2 2
ALARM K4 4 1
CAM PC 30 1
Monitor number
Camera number
No number indicates no camera is
selected.
Lists the display mode on the moni-
KB:
OPE:
PRI:
3. To exit from the mode, press the CLEAR button.
CALL
PRESET
PROGRAM
PRESET
AUTO PAN
CAM FUNC
CLEAR
LOG OUT
tors.
SPOT: Spot mode
Tnn: Tour Sequence mode (nn is the tour
sequence number.)
SET: WJ-SX150 Setup mode
ALARM: Alarm Active mode
ACK: Alarm ACK mode
VLD H: VLD History Table
ALM H: Alarm History Table
SYS S: System Status Table
Lists the system controller number or
PC.
Lists the operator number
Lists the priority number