The Main Window - Panasonic WJ-SX150 Operating Instructions Manual

Startup/Termination
1. Select "Start" – "Program" – "Panasonic" – "SX150 Admin
Console x.x" or double-click the "SX150 Admin Console
x.x" icon on the desktop.
The UserID and Password Required window will
appear on the PC screen.
2. Enter "admin" and "sx150" in the boxes "Name" and
"Password" respectively.
Then, click on the OK button.
SX150 Admin Console starts up and the main window
will appear on the PC screen.
3. When terminating the software, click on the EXIT button
or press the ESC button on the PC keyboard. The main
window will close and SX150 Admin Console will be ter-
minated.
Note: The operator name and password are changeable.
Operator addition is also available. The configuration of
each operator name, password and level are neces-
sary. (Refer to p. 68 Account Manager.)
52
EXIT button
Minimizing button

The Main Window

This window appears when starting up SX150 Admin
Console.
Clicking on each button in the window will display the asso-
ciated configuration window.
Refer to the description of each window for details.
SEQUENCE
(Tour Sequence): Tour Sequence window. (p.
(Group Sequence): Group Sequence window (p.
SCHEDULE
(Timer Event):
Timer Event window (p. 55)
(Camera Cleaning):
Camera Cleaning window (p. 56)
(Daylight Saving time):
Daylight Saving Time window (p. 56)
ALARM
(Alarm Mode):
Alarm Mode window (p. 57)
(Alarm Event):
Alarm Event window (p. 58)
(Alarm Port):
Alarm Port window (p. 59)
OPERATOR
(Operator Registration):
Operator Registration window (p. 59)
(Level Table):
Level Table window (p. 60)
(Monitor Selection):
Monitor Selection window (p. 61)
53)
54)