Camera Function Control; Camera Setup; Camera Function (Shortcut Function) - Panasonic WJ-SX150 Operating Instructions Manual

CAMERA FUNCTION CONTROL

Camera Setup

1. Select the desired monitor and camera. (Refer to p. 74
Monitor Selection and p. 75 Camera Selection.)
2. Press the F1 button while holding down the SHIFT but-
ton.
The CAM SETUP indicator on the controller will light up
and the camera's SETUP MENU will appear on the
active monitor.
F1 ACK
CAM SETUP SUSPEND
F2 GROUP SEQ
INDEX REW/FF
PREV
RECORDER STEP
STOP
STOP PLAY
OSD
SETUP
3. To select the desired item in the menu, move the joy-
stick to or . To select the desired parameter (or
mode) in the menu, move the joystick to t or s.
4. To execute the currently highlighted selection and to
enter a submenu of SETUP MENU, press the CAM
(SET) button.
5. To leave from the currently selected menu and to return
to the previous page of the menu, press the CAM (SET)
button.
6. Press the RESET button in the menu to reset the para-
meter of the selected item to the factory default setting
or to enter SPECIAL MENU when SPECIAL is highlight-
ed in SETUP MENU.
7. To restore all factory default settings, press the RESET
button.
Notes:
• Refer to the operating instructions of the selected
camera for details.
• Move the joystick while holding down the SHIFT
button to move the camera smoothly for presetting
the positions in the camera's SETUP MENU.
8. To close the camera's SETUP MENU, press the F1 but-
ton while holding down the SHIFT button.
The CAM SETUP indicator goes off.
78
RESET
ALL RESET
TOUR SEQ PRESET
T&D CAM ID EVENT
AUX1 OFF AUX1 ON PROGRAM
STILL
NEXT
MON STATUS ALL
AUTO PAN
AUX2 OFF AUX2 ON
EL-ZOOM
PAUSE
ALM H VLD H SYS S
CAM FUNC
DEF OFF DEF ON
PAUSE SEQUENCE
MON (ESC) CAM (SET)
LOG OUT
SHIFT MON LOCK MULTI SCREEN SEL WIPER

Camera Function (Shortcut Function)

The following function is available only when specified cam-
eras with the camera function feature are used.
This function enables executing camera functions via a
shortcut.
1. Select the desired monitor and camera. (Refer to p. 74
Monitor Selection and p. 75 Camera Selection.)
2. Press the AUTO PAN button while holding down the
SHIFT button.
"F_ _ _ _" will appear on the LED display of the con-
troller as shown in the figure.
CALL
PRESET
F1
CAM SETUP
CLEAR
F2
INDEX
RECORDER
STOP
STOP
SETUP
3. Press the numeric buttons to select an assigned func-
tion number, then press the CAM (SET) button.
For example, enter 175 for AGC ON.
The selected function will be executed on the active
monitor.
Notes:
• When you select a wrong number, press the CLEAR
button to clear the numeric input.
• Refer to the cameras' operating instructions for
details on available shortcuts.
4. To exit from the mode, press the MON (ESC) button
then press the AUTO PAN button while pressing the
SHIFT button.
ACK RESET
SUSPEND ALL RESET
GROUP SEQ TOUR SEQ
T&D CAM ID EVENT
REW/FF AUX1 OFF AUX1 ON
STILL
PREV NEXT
MON STATUS ALL
AUX2 OFF AUX2 ON
STEP EL-ZOOM
PAUSE
ALM H VLD H
DEF OFF
PLAY PAUSE SEQUENCE
MON (ESC) CAM (SET)
OSD
MON LOCK WIPER
SHIFT MULTI SCREEN SEL
CALL
PRESET
PROGRAM
PRESET
AUTO PAN
SYS S
CAM FUNC
DEF ON
CLEAR
LOG OUT