Recorder Control (Terminal Mode); Displaying Wj-Hd500 Series Setup Menu; Controlling Digital Disk Recorder Wj-Hd500 Series - Panasonic WJ-SX150 Operating Instructions Manual

RECORDER CONTROL (TERMINAL MODE)

Matrix switcher can control Digital Disk Recorder WJ-
HD500 Series. The following is the procedure of WJ-HD500
Series SETUP MENU.
Note: The following operating procedures those of the ter-
minal mode. If you are using a PS·Data system con-
troller, refer to p. 99.
Displaying WJ-HD500 Series SETUP
MENU
To display WJ-HD500 Series SETUP MENU, follow the pro-
cedure below.
1. Confirm that WJ-HD500 Series is correctly and securely
connected.
2. Select a monitor (1 to 4) and a camera (1 to 16) by
pressing the numeric button, then press the MON (ESC)
button. The monitor and camera number will appear on
the LED display.
3. Press the RECORDER button.
The system will enter the recording mode and the
selected monitor will change into multiscreen display.
Then, the selected monitor number and "-H00" will
appear on the LED display
4. Press the SETUP button while holding down the SHIFT
button on the system controller.
WJ-HD500 Series SETUP MENU will appear on the
active monitor as shown below, and the system con-
troller's SETUP indicator will light up.
The following functions and buttons are valid in SETUP
MENU.
Joystick to UP ( ): Moves the cursor up.
Joystick to DOWN ( ): Moves the cursor down.
Joystick to L (t): Moves the cursor to the left.
Joystick to R (s): Moves the cursor to the right.
CAM (SET) button: Executes the selections and dis-
plays a submenu.
NEXT button: Increments a parameter.
PREV button: Decrements a parameter.
MON (ESC) button: Returns to SETUP MENU or the
previous menu.
96
L
.
F1 ACK
CAM SETUP SUSPEND
F2 GROUP SEQ
REW/FF
INDEX
PREV
STEP
RECORDER
STOP
STOP PLAY
OSD
SETUP
5. To end the setting and return to the normal view, press
the SETUP button while holding down the SHIFT button
when SETUP MENU is displayed. The system con-
troller's SETUP indicator will go out.
Controlling Digital Disk Recorder WJ-
HD500 Series
The following are the operating procedures of WJ-HD500
Series via system controller.
Note: Refer to the operating instructions of Digital Disk
Recorder WJ-HD500 Series for details.
Recorder Mode
Before operating the recorder, it is necessary to enter the
recorder mode.
1. Select the desired monitor and camera. (Refer to p. 74
Monitor Selection and p. 75 Camera Selection.)
The monitor number and camera number will appear on
the LED display.
00: Multiscreen display
01 to 16: Spot display (camera number)
UP
R
DOWN
RESET
ALL RESET
TOUR SEQ PRESET
T&D CAM ID EVENT
PROGRAM
AUX1 OFF AUX1 ON
STILL
NEXT
MON STATUS ALL
AUTO PAN
AUX2 OFF AUX2 ON
EL-ZOOM
PAUSE
ALM H VLD H SYS S
CAM FUNC
DEF OFF DEF ON
SEQUENCE
PAUSE
MON (ESC) CAM (SET)
LOG OUT
MON LOCK WIPER
SHIFT MULTI SCREEN SEL
RECORDER
CALL
PRESET
CLEAR