Alarm Port; Operator Registration - Panasonic WJ-SX150 Operating Instructions Manual

Alarm Port

This window configures the parameters of alarm inputs.
How to Display
To display this window, click on the
ton in the main window (p. 53).
Parameters
• Alarm Port Group
Select the desired alarm input parameter in each alarm
port's drop-down menu.
N.O. : Normally Open
N.C. : Normally Close
• Time Adjust Box
Select the alarm port to assign to the time adjustment.
When not assign any port to time adjustment, select None.
(Save Exit) button
Saves the configuration and closes the Alarm Input window.
(Cancel Exit) button
Cancels the configuration and closes the Alarm Input win-
dow.
59

Operator Registration

This window configures the parameters of each operator:
the ID, password, level, priority and camera access.
(Alarm Port) but-
How to Display
To display this window, click on the
Registration) button in the main window (p. 53).
Parameters
• Operator Number
This box displays a list of registered operators.
• Add Operator Number
This drop-down menu is used for the new operator number
selection.
• Operator Group
This group configures each operator's password, level and
priority.
Note: Before configuring this window, check on the
restrict level of each operation in the Level Table
window.
1-6: These are operator numbers who are registered as
the factory default setting. Operator Number 1 can-
not be deleted.
Timer: This operator is used for the priority change of a
timer event. When the timer event's priority is higher
than that of an operator, the event is valid. When an
operator's priority is higher than that of a timer
event, the event is invalid. This operator cannot be
deleted.
ID: Enter an operator's ID. From 1 to 99999 are avail-
able.
Password: Enter a password. From 1 to 99999 are
available.
Level: Select 1, 2 or 3.
Priority: Select the operator's priority from 1 (highest)
to 16 (lowest).
(Operator