Monitor Selection; Auto Login/Logout (Auto Log-In/Log-Out) - Panasonic WJ-SX150 Operating Instructions Manual

Monitor Selection

This window determines whether a system controller or PC
can select a monitor.
How to Display
To display this window, click on the
Selection) button in the main window (p. 52).
Parameters
Select OK to permit each controller and the PC to control
Monitor 1 to 4.
Select NG to restrict each controller and the PC to control
Monitor 1 to 4.
(Save Exit) button
Saves the configuration and closes the Monitor Select win-
dow.
(Cancel Exit) button
Cancels the configuration and closes the Monitor Select
window.
61
Auto Login/Logout (Auto Log-in/Log-
out)
This window configures the auto log-in/log-out parameter of
each data port.
An operator is selectable for auto log-in function.
The log-out time is selectable for auto log-out function.
(Monitor
How to Display
To display this window, click on the
Login/Logout) button in the main window (p. 52).
Parameters
• Auto Login Box
Click on the checkboxes DATA 1 to 4 to select an operator
for auto log-in. Then, select an operator ID. It will be the
log-in ID of the system controller connected to the data
port.
• Auto Logout Box
Click on the checkbox of the data port connecting the sys-
tem controller for auto log-out. Then, select the elapsed
time for auto log-out.
(Save Exit) button
Saves the configuration and closes the Auto Login/Logout
window.
(Cancel Exit) button
Cancels the
Login/Logout window.
Notes:
• Both of auto log-in and auto log-out cannot be assigned
to the same data port.
Either of them is selectable.
• Data ports are usable for RS-485 camera connections.
(Refer to p. 34.) However, when an RS-485 camera is
connected to a data port, its port number is displayed
in gray and auto log-in/log-out is not assignable. (Refer
to p. 65 for details of data port setting.)
• When PSD is set for DATA 4 in the Data Port (refer to p.
65) window, its port number is displayed in gray and
auto log-in/log-out is not assignable. (The factory
default setting of the DATA 4 is PSD.)
configuration and closes
(Auto
the Auto