Camera Panning Function - Panasonic WJ-SX150 Series Addendum

■ Camera Panning Function

There are three panning modes available as follows:
sequence mode, sort mode, and auto pan. (Refer to the
operating instructions of matrix switcher.)
1. Select the desired monitor and camera. (Refer to p. 3
Monitor Selection and p. 3 Camera Selection.)
2. Press the MENU button repeatedly until "Auto Mode"
appears on the LCD.
Auto Mode
Seq Sort Pan Patrol
3. Press the assigned function button to activate the pan-
ning function of the selected camera.
The LCD will indicate the selected mode as follows.
F1: "Seq" (Activates SEQUENCE PAN.)
F2: "Sort" (Activates SORT PAN.)
F3: "Pan" (Activates AUTO PAN.)
Note: The AUTO MODE parameter, previously set in
the camera's SETUP MENU, will be automatically
replaced to the activated function parameter.
4. To exit the mode, press the MON (ESC) button.
8
■ Changing to Black and White
This function gets the clear camera images on the monitor
while shooting the objects under low light conditions.
1. Select the desired monitor and camera. (Refer to p. 3
2. Press the MENU button repeatedly until "BW Mode"
009
3. Press the F1 button to change the image from the color
4. Press the F2 button to change the BW image to the
5. Press the MON (ESC) button to exit the mode.
Images
Monitor Selection and p. 3 Camera Selection.)
appears on the LCD.
BW Mode
On Off Auto1 Auto2
mode to the BW (black and white) mode on the active
monitor.
color image on the active monitor.
010