Notification About Ps·data Controller Operation - Panasonic WJ-SX150 Operating Instructions Manual

Matrix switcher

Hide thumbs Also See for WJ-SX150:

Table of Contents

NOTIFICATION ABOUT PS·DATA CONTROLLER OPERATION

In the factory default setting, you can control the unit, if you connect a PS·Data system controller to the DATA 4 port. For exam-

ple, if you connect a PS·Data unit supporting network connections (refer to p. 39), remote-control of the unit and the PS·Data

units will be available with a system controller or PC.

When you use a PS·Data system controller (WV-CU360C), take notice the following:

• The administer authorization and log-in/log-out procedure differs from the unit. They are conformed to the system con-

troller. Refer to the system controller's operating instructions.

• Use the PS·Data template supplied to the system controller, as the operating procedures differ from those of the terminal

mode. (Refer to pp. 89 to 94.)

• When connecting a recorder to the unit, you may have to configure the settings of the unit and recorder, depending on the

recorder's available functions and connections. (Refer to p. 37.)

Table of Contents