Panasonic WJ-SX150 Series Addendum
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Matrix Switcher
  5. WJSX150 - SWITCHER - ADDENDUM
  6. Addendum

Panasonic WJ-SX150 Series Addendum

Addendum for system controller wv-cu950/wv-cu650: matrix switcher wj-sx150 series operating procedures
Hide thumbs Also See for WJ-SX150 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Addendum for WV-CU950/650 and WJ-SX150 Series
The descriptions in this document are applicable when WJ-SX150A Administrator Console and the firmware of this unit (matrix
switcher) are Ver. 2.04 or later.
Note: Refer to the operating instructions of matrix switcher for how to check the version.
(1) ADDENDUM FOR SYSTEM CONTROLLER WV-CU950/WV-CU650:
MATRIX SWITCHER WJ-SX150 SERIES

OPERATING PROCEDURES

INSTALLATIONS AND CONNECTIONS
■ Basic System Connections
• The connection details are the same as System
Controller WV-CU360C/CJ. Refer to the operating
instructions of matrix switcher .
• To connect System Controller WV-CU950 or WV-CU650
to Digital Disk Recorder WJ-HD300 Series or WJ-HD220
Series via the matrix switcher, refer to pp. 37 to 40.
SETUP PROCEDURES (HARDWARE)
■ MODE Switch Setting
Either of the terminal mode or PS·Data mode are applicable
for connections. Refer to WV-CU950/WV-CU650 Operating
Instructions for details on the switch setting for each mode.
BEFORE OPERATION
Note: This section describes the terminal mode. To operate
in the PS·Data mode, refer to the operating instructions.
Before starting the following procedures, all system compo-
nents must be turned on.
The following procedures are applicable when the system
controller is connected to the matrix switcher.
■ Operation Start (Login)
Note: When auto login is set to ON, operators can log into
the system without entering their passwords. (Refer to
p. 2 Operation Start (Auto Login).)
■ CONTROLLER NO. Switch
Setting
Normally, set this switch to "1" (default position).
This operation is skipped when the auto login is set to ON.
(Refer to the operating instructions of matrix switcher.)
1. Turn on the power switches of all system components.
The OPERATE indicator will light up.
2. To turn on the power of the system controller, connect
the AC adapter to the AC outlet.
The OPERATE indicator lights up and "Terminal Mode
No User" appears on the LCD.
Terminal Mode
No User

Advertisement

Table of Contents
loading

Related Manuals for Panasonic WJ-SX150 Series

Summary of Contents for Panasonic WJ-SX150 Series

  • Page 1: Operating Procedures

    The descriptions in this document are applicable when WJ-SX150A Administrator Console and the firmware of this unit (matrix switcher) are Ver. 2.04 or later. Note: Refer to the operating instructions of matrix switcher for how to check the version. (1) ADDENDUM FOR SYSTEM CONTROLLER WV-CU950/WV-CU650:...

  • Page 2: Operation End (Logout)

    "Mon -" "Cam - -" automatically appears. Auto login configurable Administrator Console. (Refer to the operating instructions of matrix switcher.) Mon- Cam-- ■ Operation End (Logout) This operation is skipped when the auto logout is set to ON. This function is used when an operator leaves the controller or no longer requires access to the system.

  • Page 3: Monitor Selection And Camera Selection

    MONITOR SELECTION AND CAMERA SELECTION Note: This section describes the terminal mode. To operate in the PS·Data mode, refer to the operating instructions. After the login procedure, the following operations are avail- able to control the system. The operation begins with monitor selection. Then, the image of selected camera appears on the active monitor.

  • Page 4: Camera Control

    CAMERA CONTROL Note: This section describes the terminal mode. To operate in the PS·Data mode, refer to the operating instructions. Buttons and control for cameras or camera site accessories are located on the 3D joystick unit and the right side of main unit.

  • Page 5: Program Preset Position

    ■ Program Preset Position 1. Select the desired monitor and camera. (Refer to p. 3 Monitor Selection and p. 3 Camera Selection.) 2. To move the camera to the position to be preset, move the 3D joystick and press the lens control buttons. 3.

  • Page 6: Camera Function Control

    CAMERA FUNCTION CONTROL Note: This section describes the terminal mode. To operate in the PS·Data mode, refer to the operating instructions. ■ Camera Setup 1. Select the desired monitor and camera. (Refer to p. 3 Monitor Selection and p. 3 Camera Selection.) 2.

  • Page 7: Patrol Learn And Play

    ■ Patrol Learn and Play A routine of manual operations can be stored for a specific time and later reproduced repetitively. 1. Select the desired monitor and camera. (Refer to p. 3 Monitor Selection and p. 3 Camera Selection.) 2. To save the patrol sequence, follow the procedure below.

  • Page 8: Camera Panning Function

    There are three panning modes available as follows: sequence mode, sort mode, and auto pan. (Refer to the operating instructions of matrix switcher.) 1. Select the desired monitor and camera. (Refer to p. 3 Monitor Selection and p. 3 Camera Selection.) 2.

  • Page 9: Camera Site Accessories Control

    CAMERA SITE ACCESSORIES CONTROL Note: This section describes the terminal mode. To operate in the PS·Data mode, refer to the operating instructions. ■ Receiver Control The following functions are available only when the receivers are included in the system and the specified camera housing is installed.

  • Page 10: Running Sequence

    SEQ PAUSE/SEQ STOP button while holding down the SHIFT button Note: If an alarm is activated during a sequence pause, the sequence runs again after the matrix switcher recovers from the alarm mode. T04P previously...

  • Page 11: Monitor Display Control

    MONITOR DISPLAY CONTROL Note: This section describes the terminal mode. To operate in the PS·Data mode, refer to p. 35. ■ On-screen Display (OSD) Control The procedure described below lets you determine the dis- play parameters, such as camera title, clock and status, on and off on the active monitor screen.

  • Page 12: System Status Table

    2. Perform desired operations. q Moving the clock display Move the 3D joystick while holding down the F1 but- ton. (1) will move to the desired direction. w Moving the Camera Title Display Move the 3D joystick while holding down the F2 but- ton.

  • Page 13: Alarm Recall

    ■ Alarm History Table There are 100 alarm records stored in chronological order in 10 pages of tables. 1. Select the desired monitor. (Refer to p. 3 Monitor Selection.) 2. Press the ALM RECALL button. "Alarm Recall" will appear on the LCD. The ALARM HISTORY table will appear on the active monitor as shown in the figure.

  • Page 14: Alarm Control

    MONITOR OUT 1 to 4. For example, when an alarm input signal is activated on MONITOR OUT 1, the matrix switcher supplies an alarm output signal from Alarm Output 1. • The alarm number and "Alarm" sign will appear on the LCD.

  • Page 15: Resetting The Alarm Inputs

    ■ Resetting the Alarm Inputs There are two alarm reset functions: • Alarm reset (resetting the alarm inputs per monitor) • Alarm all reset (resetting all the alarm inputs) ● Alarm Reset 1. Select a monitor which displays "ALARM". 2. To reset the alarms, press the ALM RESET/ALM ALL RESET button.

  • Page 16: Multiplexer Operations

    HD100 Series or time-lapse VCR, when connected to them. Note: Before the use, it is necessary to install the Multiplexer board in the matrix switcher and configure the system through SETUP MENU and WJ-SX150A Administrator Console. (Refer to the operating instruc- tions of matrix switcher.)
  • Page 17 8. To cancel the zooming, press the EL-ZOOM button. Note: Still picture is not available while zooming is acti- vated. Note: When a WJ-HD100 Series recorder or a Panasonic time-lapse VCR is connected to the matrix switcher, recording status will appear on the monitor in the recorder mode.

  • Page 18: Wj-Hd500 Series Control (Terminal Mode)

    WJ-HD500 SERIES CONTROL (TERMINAL MODE) Matrix switcher can control the following functions of Digital Disk Recorder WJ-HD500 Series. The following is the pro- cedure of WJ-HD500 Series SETUP MENU. Notes: • The following operating procedures are for the terminal mode. If you are using a PS·Data system controller, refer to p.

  • Page 19: Recorder Mode

    ■ Controlling Digital Disk Recorder WJ-HD500 Series The following are the operating procedures of WJ-HD500 Series via system controller. Note: Refer to the operating instructions of Digital Disk Recorder WJ-HD500 Series for details. ● Recorder Mode Before operating the recorder, it is necessary to enter the recorder mode.

  • Page 20: Manual Recording

    PORT/460 MUX MOTION DET in SETUP MENU or the Alarm Mode window in WJ-SX150A Administrator Console. (Refer to the operating instructions of matrix switcher.) To stop the alarm recording, press the ALL RESET button while holding down the SHIFT button.
  • Page 21 • Record List/Thumbnail Display You can operate the Record List or Thumbnail Display by referring to the recorder’s operating instructions. In addi- tion, the following operations from the system controllers are also available. • Record List DATE MAY29.00 ALL GROUP GROUP TIME REC-MODE...
  • Page 22 WJ-HD300 SERIES CONTROL (TERMINAL MODE) Matrix switcher can control the following functions of Digital Disk Recorder WJ-HD300 Series. The following is the pro- cedure of WJ-HD300 Series SETUP MENU. Notes: • The following operating procedures are for the terminal mode. If you are using a PS·Data system controller, refer to p.

  • Page 23: Search Mode

    ● Normal Playback The operations are the same as WJ-HD500 Series. (Refer to p. 19.) Note: Refer to the recorder’s operating instructions for details and other playback modes. ● Manual Recording The operations are the same as WJ-HD500 Series. (Refer to p.
  • Page 24 Available buttons and functions (DATA COPY window) <Main unit> JogDial clockwise: Increments a parameter. JogDial counterclockwise: Decrements a parameter. CAM (SET) button: Executes the selection and starts data copy. (If "OK" is selected) / Cancels the selec- tion and returns to the upper menu. (If "CANCEL" is selected) MON (ESC) or EXIT button: Cancels the selection and returns to the upper menu.
  • Page 25 7. Select a desired recording event by performing one of the following. • Move the 3D joystick controller to up or down. • Rotate the JogDial clockwise or counterclockwise. • Press the + or – button. Note: To move to the next or previous page, perform either of the following.
  • Page 26 • VMD search Recording events will be searched by the date and time when a camera detected the brightness-level change. Then, a result list or a thumbnail will be displayed. For playback, you will select a time and date displayed on the result list or thumbnail.
  • Page 27 Note: To delete the motion detection area, select "DELETE AREA" on the status bar by rotating the JogDial or pressing the +/– button. Then, move the "+" mark to the desired area with the joystick, and press the CAM (SET) button. 10.
  • Page 28 3. Select the desired marked time by performing one of the following. • Move the 3D joystick controller up or down. • Rotate the JogDial clockwise or counterclockwise. • Press the + or – button. Note: To move to the next or previous page, perform either of the following.

  • Page 29: System Function

    Note: To cancel the setting and exit "HD300 A – B repeat", press the MON (ESC) or EXIT button. The LCD display will return to the default status. 3. During playback, press the F1 button at the point you wish to start playback. The playback start point (A) will be set.

  • Page 30: Wj-Hd200 Series Control (Terminal Mode)

    WJ-HD200 SERIES CONTROL (TERMINAL MODE) Matrix switcher can control the following functions of Digital Disk Recorder WJ-HD200 Series. The following is the pro- cedure of WJ-HD200 Series SETUP MENU. Notes: • The following operating procedures are for the terminal mode.
  • Page 31 3. Press the numeric buttons or +/– button to enter the desired date and time. The cursor can be adjusted by moving the 3D joystick rightward or leftward. 4. Press the PLAY/PAUSE button. After the search through the date and time, the recorded image will be played. 5.

  • Page 32: Terminal Mode

    Note: Before the use, it is necessary to install the Multi- plexer board in the matrix switcher, connect the matrix switcher to the digital disk recorder, and con- figure the system through WJ-SX150A Administrator Console, OSD SETUP MENU, and WJ-HD100 Series SETUP MENU.
  • Page 33 3. Press the numeric buttons or +/– button to enter the desired date and time. The cursor can be adjusted by moving the 3D joystick rightward or leftward. 4. Press the PLAY/PAUSE button. After the search through the date and time, the recorded image will be played. 5.

  • Page 34: Fast Forward

    Console, OSD SETUP MENU, and time-lapse VCR's SETUP MENU. (Refer to the operating instructions of matrix switcher.) The following is the procedure of a Panasonic model time- lapse VCR. ■ Controlling the Time-lapse VCR The following are the operating procedures of the time- lapse VCR via system controllers.

  • Page 35: Video Loss History Table

    VCR's SETUP MENU. (Refer to the oper- ating instructions of matrix switcher.) • You cannot control non-Panasonic time-lapse VCRs from system controllers. The following is the procedure of a non-Panasonic model time-lapse VCR. ■ Controlling the Time-lapse VCR ● Multiscreen Segment Switching The operations are the same as WJ-HD500 Series.
  • Page 36 The details on recorder control are described in WV- CU950/WV-CU650 Operating Instructions. However, when the system controller (WV-CU950 or WV-CU650) is con- nected to recorders via the matrix switcher (WJ-SX150 Series), the following differences will occur. ■ Unavailable Functions through...
  • Page 37 (2) ADDENDUM FOR MATRIX SWITCHER WJ-SX150 SERIES: TO USE DIGITAL DISK RECORDER WJ-HD300 SERIES/WJ-HD220 SERIES SYSTEM CONNECTIONS AND SETUPS (WJ-HD300 SERIES/WJ-HD220 SERIES) ■ Connection with Digital Disk Recorder WJ-HD300 Series Notes: • Refer to service personnel for details on the connection with a recorder to operate via LAN or the Internet.
  • Page 38 VIDEO * Set the recorder’s unit address to 5 or larger. ** LAN: Local Area Network Monitor MONITOR OUT SIGNAL GND POWER MONITOR OUT AC IN Matrix Switcher SIGNAL GND COPY 1 POWER 10/100BASE-T EXT STORAGE AC IN Recorder* HUB/Router...

  • Page 39: Ps·data Connection

    WJ-SX150A Administrator Console. (Refer to this unit’s operating instructions.) MONITOR OUT z * Recorder control from system controllers connected to the matrix switcher is not available. Notes: • Select the PS·Data protocol for the DATA 4 setting. (Refer to this unit’s operating instructions.) •...
  • Page 40 ● To Confirm the Images from a Recorder Connected to the Unit • Connection procedures are the same as WJ-HD200 Series. (Refer to the operating instructions of matrix switcher.) • Set the DATA setting to “PSD” for CAMERA 1 to 4 in the CAMERA SYSTEM SETUP menu of the recorder.
  • Page 41 WJ-HD300 SERIES CONTROL (WV-CU950/650 TERMINAL MODE) Refer to p. 22 WJ-HD300 SERIES CONTROL (TERMINAL MODE). WJ-HD300 SERIES CONTROL (WV-CU950/650 PS·DATA) Refer to p. 36 and the operating instructions of system controller.
  • Page 42 WJ-HD300 SERIES CONTROL (WV-CU360C/CJ TERMINAL MODE) • Available operations are in common with WJ-HD500 Series. (Refer to this unit’s operating instructions.) This document describes operations applicable to WJ- HD300 Series only. • You cannot control the following functions from System Controller WV-CU360C and WV-CU360CJ.
  • Page 43 4. To determine the filter setting, press the CAM (SET) but- ton. The searching filter window will be displayed on the monitor. CAMERA FILTERING CAMERA SET : [ SET ] CANCEL : [ ESC ] Note: The searching filter window differs depending on the searching filter selected in Step 3.
  • Page 44 (The list displayed in the window is the results of previ- ous search.) VMD SEARCH TIME&DATE APR.25.03*12:34:56 AM 01ch APR.25.03*12:34:56 AM 01ch APR.25.03*12:34:56 AM 01ch APR.25.03*12:34:56 AM 01ch APR.25.03*12:34:56 AM 01ch APR.25.03*12:34:56 AM 01ch APR.25.03*12:34:56 AM 01ch APR.25.03*12:34:56 AM 01ch APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK...
  • Page 45 12. Select the sensitivity by moving the joystick upward or downward. The sensitivity will be applied. OFF: The motion detector is not activated on the camera channel. LOW: The sensitivity level is low. MID: The sensitivity is level is medium. HIGH: The sensitivity level is high.
  • Page 46 COMMUNICATION PROTOCOL (FOR USERS OF WJ-HD300 SERIES) The following commands have been described in the operating instructions of this unit (matrix switcher). However, while Digital Disk Recorder WJ-HD300 Series are being connected to the unit, these commands will be changed as follows.
  • Page 47 The following commands have been newly added. These commands are available only while Digital Disk Recorder WJ-HD300 Series are being connected to the unit. Recorder Control Transmission Command Item (ASCII) Disk selection CMD:RmmDSn A - B repeat playback CMD:RmmRPn Filtering ON/OFF CMD:RmmLTn MARK CMD:RmmMP...
  • Page 48 Unit Company of Panasonic Corporation of North America Security Systems www.panasonic.com/security For customer support, call 1.877.733.3689 Executive Office: Three Panasonic Way 2H-2, Secaucus, New Jersey 07094 Zone Office Eastern: Three Panasonic Way, Secaucus, New Jersey 07094 Central: 1707 N. Randal Road, Elgin, IL 60123 Southern: 1225 Northbrook Parkway, Suwanee, GA 30024 Western: 6550 Katella Ave., Cypress, CA 90630...

This manual is also suitable for:

Wv-cu650Wv-cu950

Table of Contents