Camera Function Control - Panasonic WJ-SX350 Operating Instructions Manual

1 2
4 5
7 8
MON 0
ESC
BACK
HISTORY
7.MAY.98 12:34:56
C32 M2 CU3 3RD FLOOR
P64 T32 ROOM
4. Select 33 by pressing the Numeric buttons, then
press the FUNCTION button to toggle the camera
title display on and off on the selected monitor.
1 2
4 5
7 8
MON 0
ESC
BACK
HISTORY
7.MAY.98 12:34:56
C32 M2 CU3 3RD FLOOR
P64 T32 ROOB
5. Select 44 by pressing the Numeric buttons, then
press the FUNCTION button to toggle the display of
all item on and off on the selected monitor.
3
FUNCTION
6
9
CAM
SET
FWD
306
3
FUNCTION
6
9
CAM
SET
FWD
306

9. Camera Function Control

The camera functions (Electronic Shutter, Electronic
Sensitivity Up, ALC/MANUAL, AGC, White Balance,
BLC, Site Alarm, Camera Power, Camera Preset
Sequence, Refresh Position) can be remote controlled
on the Switcher's front panel. Control operation should
be performed with the monitoring camera picture on the
selected monitor.
The following functions are available only when the
specified cameras with the desired features are used.
Note: Selectable numbers 1 to 9 are partitioned in three
groups such as [1][2][3], [4][5][6] and [7][8][9].
The camera functions must be assigned to one of
these three groups. Refer to Function Key Mode on
page 48 for setup.
9-1. Electronic Shutter Mode
1. Select the desired monitor and camera.
Refer to Monitor Selection and Camera Selection on
pages 50 and 51.
2. Select 1 by pressing the Numeric button, then press
the FUNCTION button to toggle the camera's
Electronic Shutter on and off.
1 2
4 5
7 8
MON 0
ESC
BACK
HISTORY
3. Select 2 by pressing the Numeric button, then press
the FUNCTION button to decrease the shutter
speed of the current camera.
1/10 000 1/4 000 ........... 1/120
4. Select 3 by pressing the Numeric button, then press
the FUNCTION button to increase the shutter speed
of the current camera.
1/120 1/250 ................... 1/10 000
Notes:
• The shutter speed varies according to the
selected camera.
• The above functions are available when the
Electronic Shutter functions are assigned to
[1][2][3].
-56-
3
FUNCTION
6
9
CAM
SET
FWD