Camera Title; System Setup - Panasonic WJ-SX150 Operating Instructions Manual

The factory default setting is N.O.
Notes:
• Use N.O. type master clock.
• If TIME is selected, an alarm input terminal can adjust
the clock by ±30 seconds with an N.O. type signal
input. For example, when the clock time is between
00:59:30 and 01:00:30, it will be automatically adjusted
to 01:00:00 by the master clock.
After the configuration, press the MON (ESC) button. The
monitor display returns to 400 ALARM SETUP.
SERIAL PORT
ON: This stands for that an alarm input is accepted via
SERIAL.
OFF: This stands for that an alarm input is not accepted
via SERIAL.
The factory default setting is ON.
After the configuration, press the MON (ESC) button. The
monitor display will return to the previous menu.
After all the configurations, press the SETUP button while
holding down the SHIFT button. The configuration will be
updated when closing SETUP MENU.

CAMERA TITLE

500 CAMERA TITLE
CAM TITLE
1
2
3
4
5
6
7
8
500 CAMERA TITLE
CAM TITLE
9
10
11
12
13
14
15
16
How to Display
To display this menu on the monitor, move the cursor to 500
CAMERA TITLE in SETUP MENUby moving the joystick to
or . Then, press the CAM (SET) button. The submenu
appears on the monitor.
How to edit
48
1 of 2
2 of 2
A camera title is composed of up to 20 characters.
The first four characters (C01_(space) to C16_) are fixed
and the subsequent 20 are editable.
The characters available here are the following:
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrs
tuvwxyz0123456789!"#$%&'()*+,-./:;=?_(space)
The factory default settings are same as the illustrations.
1. Edit the camera titles by pressing the NEXT or PREV
buttons.
The NEXT button toggles these characters in this order.
The PREV button toggles these characters in a reverse
order.
Joystick and the CLEAR button are also usable for the
edit. (Refer to p. 44 Displaying SETUP MENU for each
use.)
2. After the configuration, press the MON (ESC) button.
The monitor display will return to the previous menu.
After all the configurations, press the SETUP button while
holding down the SHIFT button. The configuration will be
updated when closing SETUP MENU.
Notes:
• When moving the joystick to
ERA TITLE 1 of 2, the monitor will display 2 of 2 (the
next page).
• When moving the joystick to
TITLE 2 of 2, the monitor will display 1 of 2 (the previous
page).
• Original characters are configurable through SX150
Admin Console, but they are not displayed correctly in
SETUP MENU. They are displayed as
Edit Font window.)

SYSTEM SETUP

600 SYSTEM
610 COMPENSATION/VD2/DATA O
O
620 RS485 CAMERA
630 DATA4/PSD PORT SELECT
640 PSD PORT SPEED
650 SERIAL PORT SPEED
660 EXT IN
670 CAMERA CLEANING
How to Display
To display this menu on the monitor, move the cursor to 600
SYSTEM in SETUP MENU by moving the joystick to
Then, press the CAM (SET) button. The submenu appears
on the monitor.
Parameters
Move the joystick to move the cursor.
at the bottom of CAM-
at the top of CAMERA
. (Refer to p. 64
PSD
9600bps
38400bps
GENLOCK OFF
OFF
or .