Log-Out; Auto Log-In; Auto Log-Out - Panasonic WJ-SX150 Operating Instructions Manual

Log-out

This operation is skipped when the auto log-out is set to
ON.
This function is used when an operator leaves the controller
or no longer requires access to the system.
1. To logout from the system press the CLEAR button
while holding down the SHIFT button.
"NO USER" appears on the LED display of the con-
troller.
TOUR SEQ
NEXT
PAUSE
PAUSE
MON (ESC)
SHIFT
Notes:
• If you want to save the power consumption, discon-
nect the PC plug from the controller, and remove
the AC adapter from the AC outlet.
• If the auto log-out is set to ON, any operator can
logout automatically if no operation takes place for
a specific time. "NO USER" automatically appears
on the LED display.
• The time to logout is configurable through SX150
Admin Console. (Refer to p. 61 Auto Login/Logout.)
73
CALL
PRESET
T&D CAM ID EVENT
AUX1 OFF AUX1 ON PROGRAM
STILL
PRESET
MON STATUS ALL
AUTO PAN
AUX2 OFF AUX2 ON
EL-ZOOM
ALM H VLD H SYS S
CAM FUNC
DEF OFF DEF ON
SEQUENCE
CAM (SET) CLEAR
MON LOCK WIPER LOG OUT
MULTI SCREEN SEL

Auto Log-in

If the auto log-in is set to ON, any operator can login auto-
matically. After the controller is turned on, "AUTO" appears
on the LED display for approximately 2 seconds, then
"READY" automatically appears.
Auto log-in is configurable through SX150 Admin Console.
(Refer to p. 61 Auto Login/Logout.)

Auto Log-out

If the auto log-out is set to ON and no operation takes place
for a specific time, any operator can logout automatically.
"NO USER" automatically appears on the LED display.
Auto log-out and the time to logout are configurable
through SX150 Admin Console. (Refer to p. 61 Auto Login/
Logout.)