Camera Function Control; Camera Setup - Panasonic WJ-SX150 Series Addendum

CAMERA FUNCTION CONTROL

Note: This section describes the terminal mode. To operate
in the PS·Data mode, refer to the operating instructions.

■ Camera Setup

1. Select the desired monitor and camera. (Refer to p. 3
Monitor Selection and p. 3 Camera Selection.)
2. Press the MENU button repeatedly until "Camera Setup"
appears on the LCD.
Camera Setup
On Off
3. Press the F1 button. The camera's SETUP MENU will
appear on the active monitor.
Camera Setup
5On
Off
4. To select the desired item in the menu, move the 3D
joystick to C or D. To select the desired parameter (or
mode) in the menu, move the 3D joystick to A or B.
5. To execute the currently highlighted selection and to
enter a submenu of SETUP MENU, press the CAM
(SET) button.
6. To leave from the currently selected menu and to return
to the previous page of the menu, press the MON (ESC)
button.
7. Move the cursor to SPECIAL on the camera's setup
menu, and press the F3 button to display the special
menu.
8. Move the cursor to CAMERA RESET on the camera's
setup menu, and press the F4 button to reset all the
functions to the defaults.
Note: Refer to the operating instructions of the selected
camera for details.
9. To close the camera's SETUP MENU, press the F2 but-
ton.
10. To exit the mode, press the MON (ESC) button.
6
006
Rst A.Rst
006
Rst A.Rst
■ Camera Function (Shortcut
Function)
The following function is available only when specified cam-
eras with the camera function feature are used.
This function enables executing camera functions via a
shortcut.
1. Select the desired monitor and camera. (Refer to p. 3
Monitor Selection and p. 3 Camera Selection.)
2. Press the numeric buttons to select an assigned func-
tion number, then press the CAM FUNC/SYS FUNC but-
ton.
For example, enter 175 for AGC ON.
The selected function will be executed on the active
monitor.
Notes:
• When you select a wrong number, press the CLEAR
button to clear the numeric input.
• Refer to the cameras' operating instructions for
details on available shortcuts.