Using Power Save Manually - Konica Minolta bizhub Pro 920 User Manual

Preparation for Use

Using Power Save Manually

Follow the procedure below to operate Power Save function (Low Power or
Sleep) manually.
1
Press [Power Save] for one second
or longer, then release it.
The following message will be dis-
played.
Using Sleep:
Entry Sleep mode, after 10 second
Press key/screen to cancel
Using Low Power:
Entry Low Power mode, after 10 second
Press key/screen to cancel
2
Power Save will be activated.
The [Power Save] LED will be lit and the touch panel will be turned off.
!
Detail
Be sure to press [Power Save] for one second or longer, otherwise the
following message will be displayed and the Sleep (Low Power) mode will
not be activated.
Press Power Save more than one second,
then release it for sleep mode
Press Power Save continuously more
than one second for low power mode
!
Detail
The machine is initially set to activate the Sleep function manually. To use
Low Power instead, refer to "1 Power Save Setting" on page 18-13.
bizhub PRO 920
2
2-27