To Bind Copies At The Center ("Fold & Staple Finisher Fs-603 - Konica Minolta bizhub C250 User Manual

3
To bind copies at the center ("Fold & Staple"): Finisher FS-603
0 When the "Fold & Staple" setting is selected, the following default set-
tings are automatically selected.
"1→2", "Sort", "Booklet",
Auto display zoom ratio when a Booklet setting is selected (×0.647)
0 If "Yes" is selected under "Center Erase", an area of 3/8 in. along the
binding is erased.
0 If paper misfeeds often occur when "No" is selected under "Center
Erase", select "Yes" to reduce the number of paper misfeeds.
1
In the Basic screen, touch [Fold & Staple].
The Center Erase screen appears.
2
Touch the button for the desired Center Erase setting.
– To erase the area along the center, touch [Yes]. To not erase the
area along the center, touch [No].
– To cancel the "Fold & Staple" setting, touch [OFF].
– To cancel changes to the settings, touch [Cancel].
3
Touch [OK].
The Basic screen appears again.
3-82
Basic copy operations
C250