After The Ess Server Is Configured - Avaya ESS User Manual

Figure 33: Configure ESS window
4. Reset the server after configuring the server.
5. Connect the configured ESS server(s) to the LAN.

After the ESS server is configured

After the ESS server is configured it attempts to register with the Main server. If the ESS server
is unable to register with the Main server within 10 minutes after being configured, an alarm is
generated. The ESS server continues its attempt to register with the Main server until
registration is successful.
Note:
An ESS server cannot register with the Main server until it has been
Note:
administered. Administration for an ESS server is done on the Main server. See
Administering ESS server on the Main server
how to administer the ESS server.
Note:
The ESS server cannot control an IPSI prior to receiving the initial translation
Note:
download from the Main server. A configured ESS server automatically receives
translations from the Main server after it is administered.
Configuring the Servers
on page 122 for instructions on
Issue 1.1 June 2005 121