Avaya ESS User Manual page 100

ESS Installation
Table 10: Installing ESS with existing servers (continued)
Task
11. Main server: Install the
RFA license and
authentication file.
12. IPSIs: Change the
dynamic IP address to a
static IP address
100 Avaya Enterprise Survivable Servers (ESS) Users Guide
Information
If the license file contains a
new module ID or if the
module ID has changed,
you must:
Use the Bash
●
command, server
-z
Use the SAT
●
command reset
system 4
After loading the license
file, verify that the ESS
Administration feature is
turned on.
In an ESS environment, all
IPSI's must have a static IP
address.
Documentation
To install the license and
authentication file see:
Installing and Configuring
●
the S8500 Media Server
(03-300143), or
Installing and Configuring
●
the S8700 Series Media
Server (03-300145).
To verify that the ESS
Administration feature is turned
on see:
Avaya Enterprise Survivable
Servers (ESS) Users Guide,
Server License Files on
page 110.
To change the IPSI from a
dynamic IP address to a static IP
address see:
Installing and Configuring
●
the S8500 Media Server
(03-300143), or
Installing and Configuring
●
the S8700 Series Media
Server (03-300145).
ESS
7 of 10