Avaya ESS User Manual page 102

ESS Installation
Table 10: Installing ESS with existing servers (continued)
Task
15. Main server: Verify
LAN/WAN connectivity
16. Main server:
Administer ESS
17. Main server: Verify
that each ESS server
registers with the Main
server
102 Avaya Enterprise Survivable Servers (ESS) Users Guide
Information
Verify communication
between each ESS server
and the Main server over
the LAN/WAN.
To verify that the Main
server can communicate
with all servers on the LAN/
WAN:
On the Main server, use the
ping command followed
by the IP address of the
ESS server.
On the Main server,
administer each ESS
server, Port Network
Communities, and no
service timer.
Use the status ess
clusters command to
verify ESS server
registration.
A configured ESS server
automatically registers with
the Main server when the
ESS administration
completes. After
registration, the ESS server
receives a translation
download from the Main
server. The ESS server
resets to load the
translations and then
re-registers with the Main
server.
Documentation
For information on how to use
the ping command, see:
Installing and Configuring
●
the S8700 Series Media
Server (03-300145), or
Installing and Configuring
●
the S8500 Media Server
(03-300143).
To administer the Main server
see:
Avaya Enterprise Survivable
Servers Users Guide,
Administering ESS on page 122.
For information on the status
ess clusters command see:
Avaya Enterprise Servers Users
Guide, status ess clusters
page 153.
on
9 of 10