Chapter 7: Ess Maintenance Object; Ess (Enterprise Survivable Server) - Avaya ESS User Manual

Chapter 7: ESS Maintenance Object

ESS (Enterprise Survivable Server)

/
S8700 | 8710 S8500
MO Name
ESS
ESS
The Enterprise Survivable Server (ESS) maintenance object (MO) monitors the status of the
ESS feature.
On the Main server the MO will:
Monitor the registration status for all administered ESS servers. See display
●
system-parameters ess for a list of administered ESS servers. The registration status
of all ESS servers is initially checked approximately ten minutes after the Main server
boots up. Subsequent to this, the registration status for all ESS servers is monitored each
time an ESS server registration status change is received at the Main server.
On an ESS server the MO will:
Monitor the registration status of the active server within an ESS server. Only the active
●
server of an ESS server pair (
MO at an ESS server does not track the registration status of other ESS servers.
Monitor the IP Server Interface (IPSI) socket connections for all administered IPSI circuit
●
packs. Each ESS server establishes a socket connection to all administered IPSI circuit
packs. These connections are used to advertise the ESS server administered values to all
IPSIs. If needed, the IPSI will use this socket connection to request service from the
ESS.server
Alarm Level Initial SAT Command to Run
MAJ
None
MIN
None
), registers with the active Main server. The ESS
S8700 | 8710
Full Name of MO
Enterprise Survivable Server
Enterprise Survivable Server
Issue 1.1 June 2005 173