Avaya ESS User Manual page 150

Maintenance
- re-registers with the Main server once the second reset is complete.
- establishes socket connections to the IPSIs in the configuration.
- advertises its administered values to all IPSIs in the configuration.
At this point the Main server receives the enabled/disabled status of the ESS server.
Tip:
Use status ess cluster n to check if the enable operation succeeded. The
Tip:
complete enable operation may take several minutes to complete.
When enable ess cluster <main cluster n> is run, the Main server:
Does nothing, if it is the ESS cluster is already enabled. The TEST RESULTS screen
●
indicates that Test 1606 passed for the Main server. See
TEST RESULTS example
Changes its state to enabled (if the ESS cluster is disabled) and:
●
- Performs a reset system 4 operation.
- Establishes socket connections to the IPSIs in the configuration.
- Advertises its administered values to all IPSIs in the configuration.
Action/Object
enable ess
The following display shows typical result for enable ess all.
150 Avaya Enterprise Survivable Servers (ESS) Users Guide
on page 151.
Qualifier Qualifier Description
enable all ESS servers
all
Number (1 - 999) of the cluster ID for the target
cluster n
ESS server or Main server.
Examples:
enable ess all
enable ess cluster 9
Figure 44: enable ess command
Login
init
inads
craft
cust su