Avaya ESS User Manual page 101

Table 10: Installing ESS with existing servers (continued)
Task
13. Main server: Configure
the Main server
14. Main server: Verify
open ports in the
customer's network
Information
The server's web interface
is used to configure the
Main server.
If the server was
re-mastered using
Communication 3.0 or later,
use the Avaya wizard to
configure the server.
If the server was updated to
Communication Manger
3.0 or later, or was already
running Communication
Manager 3.0 or later, use
the Avaya Enterprise
Survivable Servers Users
Guide to configure the
Enterprise Survivable
Server window.
In an ESS environment,
you must use static IP
addresses for the IPSIs in
the configuration.
This step may be
necessary if the customer
has firewalls. If the
customer does not have
firewalls, you can skip this
step.
Certain ports must be open
for ESS to work properly.
ESS Installation Checklist
Documentation
To configure a server for ESS
that is already running
Communication Manager 3.0 or
later use:
Avaya Enterprise Survivable
Servers Users Guide,
ESS server to Main server
page 134.
To configure the server using the
Avaya wizard see:
Installing and Configuring
●
the S8500 Media Server
(03-300143), or
Installing and Configuring
●
the S8700 Series Media
Server (03-300145).
To obtain a list of ports that must
be open for ESS, see:
Avaya Enterprise Survivable
Servers (ESS) Users Guide,
Network port considerations
page 66.
Issue 1.1 June 2005
Existing
on
on
8 of 10
101