What This Test Is Used For; Acceptance Criteria - Avaya ESS User Manual

What this test is used for

! CAUTION:
This test is service affecting.
CAUTION:
Use this test to verify that the Main server can assume control of the Port Networks under
control of the ESS server.
1. Verify that the ESS server is currently in control of the Port Network(s) under test by
executing the status ess port-network command from the Main server. The status of
the Port Network(s) under test is shown as down.
2. On the Main server, execute the get forced-takeover ipserver-interface all
command from the SAT.

Acceptance criteria

Check that the selected Port Network(s) is now under control of the Main server:
1. On the Main server:
a. Execute the status ess port-networks command. Verify the following:
- All Port Networks are listed
- The status of all Port Networks is shown as up
2. On the ESS server:
a. Execute the status ess port-networks command. Verify the following:
- All Port Networks are listed
- The status of all Port Networks is shown as down
3. Place a phone call between two Port Networks under test. If only one Port Network was
tested, skip to step 4. Verify a two way talk path.
4. Place a phone call between two Port Networks that were not under test. Verify a two way
talk path.
5. Place a phone call between a Port Network under test and one that was not under test.
Verify a two way talk path.
Testing transfer of control from ESS server to Main server
Issue 1.1 June 2005 183