Ess Server To Manual Backup Server - Avaya ESS User Manual

Enterprise Survivable Server Conversions
9. Configuring the media server using the Maintenance Web Interface causes a reset to be
executed. While this is normal, it is not sufficient to notify all of the non Avaya
Communication Manager processes of the new Cluster ID.
From the active media server command line interface use the following command to notify
all processes of the new parameters:
server -z
Then, from the SAT interface on the active media server, execute:
reset system 4
10. Re-connect the new ESS server(s) to the LAN/WAN.
11. On the Main server, verify that the new ESS server(s) register and that translations are
updated. Periodically repeat this command until each server registers.
status ess clusters
●
Note:
An ESS server only knows its own state. For some period of time (minutes) after
Note:
an ESS server boots up and connects to the network there may be a discrepancy
between the state displayed by the Main server and the ESS server(s).

ESS server to Manual Backup Server

This conversion path is not supported.
142 Avaya Enterprise Survivable Servers (ESS) Users Guide