Energy Save Mode; Auto Shut Off - Minolta Di250 Manual

2

Energy Save Mode

To save electricity, the copier enters the Energy Save Mode a given
period of time after the last activity. The initial setting is 15 min. This
function enables the copier to complete the warm-up cycle in about 30
sec. To cancel the Energy Save Mode, press any key on the control panel
or open the original cover or set an original on the Document Feeder.
Useful Tip
The time for the copier to enter the Energy Save Mode can be selected
as shown below.
From 1 to 240 min. for Di250
From 15 to 240 min. for Di350
For details, see page 4-6.
NOTE
Ð
The copier is automatically shut down if the Auto Shut OFF function is
activated while it is in the Energy Save Mode.

Auto Shut OFF

The Auto Shut OFF function shuts down the copier a given period of time
after the copier has been used last. The initial setting is 60 min.
Useful Tip
The time for the copier to enter the Auto Shut OFF mode can be
selected from 15 to 240 min. The Auto shut OFF function can even be
disabled. For details, see page 4-6.
2-34
Getting to Know Your Copier
Di250/Di350