2
Placing Originals on the Glass
Different methods are used to place the original depending on its type.
Use the procedure appropriate for your original. If you are using a
Document Feeder, see page 2-23.
Sheet Originals
Using originals not suitable for the document feeder
1
Raise the Original Cover or
Document Feeder and place the
original face down on the glass.
2
Align the rear right corner of the
original with the
Width Scale of the original glass.
3
Gently lower the Original Cover or Document Feeder.
Highly Transparent Originals
Using transparencies and translucent paper for the original
1
Place the original in the same way as the sheet originals.
2
Place a blank white sheet of paper
of the same size over the original.
3
Gently lower the Original Cover or Document Feeder.
2-28
marker on the
Getting to Know Your Copier
Di250/Di350
1166o027AA
1166o192AA
1166o028AA