Terms and Symbols for the Type of Originals and Copy Paper
A few special terms and symbols are used in this manual to designate
types of originals and copy paper. This page explains about these terms
and symbols.
Feeding Direction (copy paper path)
In this copier system, copy paper is taken up from the right-hand side of
the copier, fed through the copier toward the left-hand side, and ejected
face down onto the Copy Tray. In the figure below, the direction in which
the copy paper is fed, as indicated by the arrow, is called the "feeding
direction."
1166o216AC
"Width" and "Length"
When we talk about the size of the
original or copy, we call side A "width"
and side B "length."
A: Width
B: Length
1139o1610A
X-6
Di250/Di350