What Does Each Message Mean - Minolta Di250 Manual

5
5.8

What Does Each Message Mean?

Message
Malfunction detected. Call
your technical
representative and
provide code:
Please add toner.
The Imaging Unit needs to
be changed. Call your
technical representative.
Stapler empty. Replace
Staple Cartridge or cancel
Staple mode.
Return the following
number of originals to
Document Feeder.
Cannot
enough free memory.
Image data has caused
memory overflow. Your
copy job has been
canceled.
This mode cannot be
selected with the
5-44
Cause
The copier malfunctioned and
is unable to make copies.
Toner has run out and the
copier is unable to make
copies.
The PC Drum has reached its
service life and the copier is
unable to make copies.
The staples have run out.
The time has come when the
copier needs service.
1168P189CB
After a misfed sheet of paper
has been cleared, you need to
reload the originals fed out
onto the Document Exit Tray
onto the Document Feed Tray.
: not The copier is unable to scan
the data for lack of memory
space.
The copier is unable to scan
the data for lack of memory
space.
You have set two functions that
. conflict with each other.
When a Message Appears
Action
Call and inform your
Technical Representative of
the code being shown on the
Touch Panel.
Replace the Toner Bottle with
a new one.
(When the Message "Add
Toner." Appears,
see page 5-11.)
Call your Technical
Representative.
Reload the Staple Cartridge
with a new clip.
(When the Message "Stapler
Empty." Appears, see page
5-17.)
Call your Technical
Representative.
Add the number of originals
indicated to the bottom of the
remaining stack and reload.
Wait until a print cycle is run
or erase a reserved job to
make room for new data.
Wait until a print cycle is run
or erase a reserved job to
make room for new data.
Cancel either one of the two
functions.
Di250/Di350