Getting to Know Your Copier
2.4
Turning ON and OFF and Initial Mode
Turning ON and OFF
l
Turning the Copier ON
Press the Power Switch to
the
(ON) position.
l
Turning the Copier OFF
Press the Power Switch to
the
NOTE
Ð
The Auto Shut OFF function will automatically shut down the copier a
given period of time after the last activity, see page 2-34.
When the Copier is Turned ON
When the Power Switch is turned ON, the Touch Panel lights up.
In a few seconds, the message "Now warming-up. Ready to scan."
appears and the Start key lights up green. The copier thereafter enables
its auto copy start function, see page 2-32.
At this time, however, pressing the Start key does not start a copy cycle.
The copier needs a warm-up period of about 60 to 70 seconds (at a room
temperature of 23°C).
Di250/Di350
(OFF) position.
2
1166o224AA
2-21