Using The Single Automatic Document Feeding Mode (Sadf Mode) - Minolta Di250 Manual

Getting to Know Your Copier

Using the Single Automatic Document Feeding Mode (SADF Mode)

This is the mode in which you insert your originals one by one into the
Duplexing Document Feeder to make a copy. When you insert the original
into the Single Document Feed Tray, the copier automatically starts the
copy cycle.
NOTES
Ð
Originals available for the SADF Mode.
Type: Plain paper
Thickness: 35 g/m² to 200 g/m²
Size: A3L to A5L
Ð
The following features will be cancelled when using the SADF Mode.
2-sided Original, 2-in-1 Original, Book, Sort Mode, Group Mode,
Staple Mode, Cover Mode, Page Insertion Mode, Number Stamping
Mode, Manual Feeding, Original Direction, Margin.
1
Open the Single Document Feed
Tray and slide the Guide Plate to
the size of the original.
2
Make sure that the Start Key is lit
green and insert the original face
down into the Single Document
Feed Tray.
NOTES
Ð
Be sure to place one original at a time.
Ð
Be sure to correct any fold or curl in the original.
3
The original is automatically taken up and the copy cycle is started.
4
Making sure that the Start Key lights up green again, insert the next
original.
Di250/Di350
2
1166o025AA
1166o026AB
2-27