Auxiliary Functions; Panel Resetting; Auto Copy Start; Interrupt - Minolta Di250 Manual

2
2.6

Auxiliary Functions

Panel Resetting

The Panel Reset key resets all control panel settings to default settings
including the number of copies and zoom ratio. The settings just made
would also be cleared.
Useful Tips
The Panel Reset key enables you to cancel all previous settings at the
touch of the key.
To avoid miscopy, try to press this key before making any setting for
your own copy job.

Auto Copy Start

If you load originals into the document feeder or place an original on the
glass and press the Start key while the copier is warming up after it has
been turned ON, the Auto Copy Start function allows that copy process to
start as soon as the copier completes warming up.

Interrupt

The Interrupt function allows you to interrupt a current job and run a
different one. Pressing the Interrupt key once stops the copy cycle and
sets the copier into the Interrupt mode. Pressing the key again lets the
copier leave the Interrupt mode, returning to the previous settings.
Useful Tips
Pressing the Interrupt key sets the copier into the initial mode, except
for the finishing function which is Non-Sort.
Custom Zoom and X/Y Zoom cannot be set in the Interrupt mode.
Cover, Page Insertion and OHP Interleaving cannot be set in the
Interrupt mode, either.
NOTE
Ð
To cancel an Interrupt cycle, you need to press the Interrupt key. The
Panel Reset key does not serve this purpose.
2-32
Getting to Know Your Copier
Di250/Di350