Access Number - Minolta Di250 Manual

2

Access Number

If an access number has been programmed, it allows only particular
persons to use the copier or a supervisor to keep track of the number of
copies made by a particular department.
NOTES
Ð
If an access number has been programmed, a copy cycle can be
initiated only after the access number has been input to the copier.
Ð
Before you can use this function, you must first turn "ON" the "Copy
Track" function available from Utility, see page 4-26.
Ð
When Copy Track is set to "100
Accounts," you must enter the
4-digit access code assigned to
your account in order to make
copies.
Ð
When Copy Track is set to "1000
Accounts," you must enter your
3-digit account number in order to
make copies.
2-36
Getting to Know Your Copier
Di250/Di350
1168P168CB
1168P203CB