Minolta Di250 Manual page 155

Using the Utility Mode
NOTE
Ð
A job number key not marked with
already been stored under that number. If you store a new job in that
number key, the old job is erased.
6
To check for details of the job
stored, touch [Check] and then
touch the job number key.
NOTE
Ð
Job Memory Input is not possible in Interrupt Mode.
The job settings appear on the
Touch Panel.
Useful Tip
To change the screen, touch
[Backup] or [Next].
7
After you have checked the settings, touch [Enter].
8
Touch [Exit].
Di250/Di350
indicates that a job has
4
1168P115CB
1168P116CB
1168P117CB
4-13