Safety Notes; Installing The Copier; Installation Site; Power Source - Minolta Di250 Manual

Safety Notes

1 Safety Notes
1.1

Installing the Copier

Installation Site

To ensure utmost safety and prevent possible malfunctions of the copier,
install it in a location which meets the following requirements.
l
A place away from a curtain or the like that may catch fire and burn
easily.
l
An area where there is no possibility of being splashed with water or
other types of liquid.
l
An area free from direct sunlight.
l
A place out of the direct air stream of an air conditioner, heater, or
ventilator.
l
A well-ventilated place.
l
A dry place.
l
A dust-free location.
l
An area not subject to undue vibration.
l
A stable and level location.
l
A place where ammonia or other organic gas is not generated.
l
A place which does not put the operator in the direct stream of exhaust
from the copier.
l
A place which is not near any kind of heating device.

Power Source

The power source voltage requirements are as follows :
l
Use a power source with little voltage fluctuation.
Voltage Fluctuation: Within ± 10%
Frequency Fluctuation: Within ± 0.3%
Di250/Di350
1
1-1