Control Panel Keys And Indicators - Minolta Di250 Manual

Getting to Know Your Copier
2.3

Control Panel Keys and Indicators

Pos. Specification
1 Touch Panel
2 Utility Key
3 Mode Check Key
4 ID Key
5 10-key Pad
6 Interrupt Key
7 Clear Key
8 Panel Reset Key
9 Stop Key
10 Start Key
Di250/Di350
1 2
10
Shows various screens and messages, see page 2-18.
Press to show the utility mode, see page 4-1.
Lists the current settings on the screen. From this screen
you can access the setting screen of a particular function
and change or cancel the setting as necessary, see page
2-33.
Access to register the current settings in the program, see
page 4-12.
Press to enter the access number when Copy Track of the
Administrator mode available from User's Choice is set,
see page 2-37.
Press to access the setting screen available.
Use to enter the number of copies to be made and the
various numeric values.
Press to interrupt a current job with a different one. Press
it again to return to the previous job, see page 2-32.
Lights up to indicate that the copier is in the Interrupt mode.
Press to: Reset the multi-copy entry to 1.
Clear the settings entered from the 10-key Pad and the
access code entered.
Clear the image data scanned.
Press to set the copier into the initial mode, see page 2-32.
Press to: Stop a print cycle.Stop a scanning cycle.
Press to start the document scanning sequence or print
cycle.
Lights up green to accept a print command; lights up
orange to reject one.
3
9
1166o239DA
2
4
5
6
7
8
2-17