Minolta Di250 Manual page 225

Troubleshooting
Symptom
The image on the copy is not
aligned properly
* Call your Technical Representative if these procedures do not correct the problem.
Di250/Di350
Possible Cause
The original is not placed in
.
the correct position.
The originals may not be
suitable for use in the
1074O113
document feeder.
Something is sticking to the
Original Glass.
Action
Place the original correctly
on the Original Glass against
the Original Width Scale, see
page 2-28.
Or, load it onto the document
feeder correctly along the
Document Guide Plates, see
page 3-28.
Raise the document feeder
and place the originals on
the Original Glass one at a
time, instead of using the
document feeder, see page
2-28.
Wipe the Original Glass
clean with a soft dry cloth,
see page 7-10.
6
6-3